Other Electrical Components

Home » Products » Industrial Control Electrical Apparatus » Other Electrical Components
    1. Star-Delta StarterQJX4-d range star-delta starter is designed for starting current control of a three phase squirrel cage induction motor. If equipped with compatible thermally relay, it can be used to protect the motor against overload and phase breaking. The product is not designed for reverse conversion or AC-4 utilization category applications.
    1. Button SwitchLAY3 range button switch or push button switch is ideal for use in the AC 50Hz or 60Hz control circuits for control some aspect of a CNC machine tool, shipbuilding, textile, printing, or power generation equipment, etc. It is in modular structure and is mainly made up of an actuator, base board and contact terminals. It is typically screw mounted.
    1. GSH1 Range Reverse SwitchGSH1 range reverse switch is also known as reversing switch. It allows users to manually making and breaking an AC 50Hz circuit with rated working voltage of 690V. Under AC-21A utilization category and 220V rated working voltage, it comes with rated working current between 40A and 63A.
    1. GSH2 Range Reverse SwitchGSH2 range reverse switch meets GB 14048.3 and IEC 60947-3 standards. It is designed to make or break an electrical switch, control a three-phase asynchronous motor, or control a main circuit. A small current changeover switch can be fixed at the back end of a large current reversing switch to function as an auxiliary switch.
    1. JDX9 Range TerminalJDX9 range wiring terminal is designed for electrical wire connection in the main circuit, control circuit, electrical signal control system and electric drive system of various types of equipment and power distribution systems, such as distribution board, power distribution cabinet, machine tool, hoister, and more.
    1. IEC Standard Basic Wiring BoardThe IEC standard basic wiring board is applicable for installation in any place without influencing wire connection. While choosing horizontal installation method, please put the protruded side downward. When there are wiring terminals damaged, users can easily remove the damaged terminals without effecting neighboring ones.
    1. UTE Standard Formed RailThe UTE standard formed rail makes electrical apparatus easy for position adjustment. Several electrical devices with the same installation size can be mounted on the same rail. The product offers high degree of standardization and superior universality. We can offer 35mm UTE standard formed rails for installation of contactor ...

As an experienced electrical components manufacturer and supplier in China, TS213 provides a wide range of products that includes UTE standard formed rail, switch contactor, low voltage switch cabinet, leakage protection circuit breaker, and more.

Other Products
  • GSC2-NF Machine Interlock Switch ContactorThe relative humidity should be no more than 50% at the maximum ambient temperature of 40℃, while it could be relative higher when the ambient temperature is relatively lower. In the month with the highest relative humidity, the minimum average temperature should be no more than 25℃m ...
  • GSC1 Range Switch ContactorThe switch contactor is a straight motion mechanism with double-braking contacts.
    It comes with combination function. Except the installation side, all other sides of the electrical apparatus can be mounted with accessories.