Circuit Breaker with Leakage Protection

Home » Products » Power Distribution Electrical Apparatus » Circuit Breaker with Leakage Protection
Circuit Breaker with Leakage Protection

DZX2/4-100L range residual current circuit breaker is mainly made up of a DZX2/4-100 circuit breaker and a leakage protection module. It is ideal for use in AC 50Hz electrical circuits, and comes with rated working voltage up to 415V and rated working current up to 100A. It is designed to offer protections against electric leakage caused by electric shock and insulation failure. It also comes with overload protection, infrequent switching of circuit, infrequent starting of electric motor, and related functions. This electrical apparatus meets IEC61009 and GB16917 standards requirements.

Type Description

Design Code
TypeDesign Code Instantaneous release typeMax. rated current, lnmRated working current, ln (A)
DZX2-100L2C100A63, 80, 100
DZX4-100L4D50, 63, 80, 100
Rated Residual Operating Current
TypePole numberRated residual operating current (mA)
DZX2-100L1P, 2P, 3P, 4P30, 100, 300
DZX4-100L
Main Technical Specifications
Type Pole numberBreaking Capacity Rated residual operation current (mA)Rated residual non-operation current(mA)Breaking time Wiring Capacity
DZX2/4-100L1P, 2P, 3P, 4P10KA3015t≤ 0.1s35 mm2
10050
300150
Wiring Picture and Outline Dimension
Wiring picture Type Note Outline Dimension (mm)
Single pole, dual wire1. No reversed connection between zero line and phase line
2. Applicable for electrical circuits with rated voltage of 415V or below
81×140×77
Dual pole, dual wireApplicable for electrical circuits with rated voltage of 415V or below 108×140×77
Three pole, four wire 1. The power supply end should be connected with zero line, and the zero line shouldn't be disconnected by the residual current circuit breaker
2. No reversed connection between zero line and phase line
3. Applicable for electrical circuits with rated voltage of 415V or below
170×140×77
Four pole, four wire 1. No reversed connection between zero line and phase line
2. Applicable for electrical circuits with rated voltage of 415V or below
197×140×77

TS213 is a professional residual current circuit breaker manufacturer in China. Our company provides a variety of products, including capacitor switching contactor, electric overload contactor relay, isolation switch, leakage protection circuit breaker, and much more.

Feedback Form
Other Products
  • Miniature DC Circuit BreakerGSB1Z-40 range miniature DC circuit breaker is applicable for use in DC electrical circuits to offer overload protection, short circuit protection and infrequent circuit switching functions. Its rated working voltage is up to 250V and rated working current is 40A.
  • Isolation SwitchGSG1-100 range isolation switch is designed to function as the main switch in electrical distribution system to discontinue or connect electrical circuit with load. When it is on switching-on status, it allows the normal working current to pass through and also comes ...